CX2SA  > SATDIG   11.01.18 04:44l 640 Lines 22077 Bytes #999 (0) @ WW
BID : AMSATBB1313
Read: GAST
Subj: AMSAT-BB-digest V13 13
Path: DB0NMS<DB0UHI<DB0OSN<DB0RES<DB0OVN<DB0GOS<ON0AR<OZ5BBS<CX2SA
Sent: 180111/0228Z @:CX2SA.SAL.URY.SOAM #:32090 [Salto] FBB7.00e $:AMSATBB1313
From: CX2SA@CX2SA.SAL.URY.SOAM
To  : SATDIG@WW

Today's Topics:

   1. Re: SDR radio (Brad Brooks)
   2. Re: [Kenwood] FS: Kenwood TS2000 HF/VHF/UHF/satellite	radio
      (Frank Woelfle)
   3. Fox Tlm with FC dongle (David G0MRF)
   4. Fox-1D Launch Live Blog (Paul Stoetzer)
   5. Re: [Bod] Fox-1D Launch Live Blog (Mark L. Hammond)
   6. Fox Telemetry using Funcube Dongle Pro Plus (Scott Harvey)
   7. Re: Fox Telemetry using Funcube Dongle Pro Plus (Burns Fisher)
   8. Re: Fox-1D Launch Live Blog (Mac A. Cody)
   9. Re: Fox-1D Launch Live Blog (Paul Stoetzer)
  10. Re: SDR Radios (Richard Lawn)
  11. Re: Fox Tlm with FC dongle (Mark L. Hammond)
  12. Re: SDR Radios (Paul Stoetzer)
  13. Re: SDR Radios (Mark L. Hammond)
  14. Re: SDR Radios (Richard Lawn)


----------------------------------------------------------------------

Message: 1
Date: Wed, 10 Jan 2018 17:09:18 -0600
From: Brad Brooks <brad.wf7t@xxxxx.xxx>
To: AMSAT <amsat-bb@xxxxx.xxx>, amsat-bb@xxxxxx.xxx
Subject: Re: [amsat-bb] SDR radio
Message-ID: <9c6f2aa5-e612-438e-bae2-afbcdf6b73f1@xxxxx>
Content-Type: text/plain; charset="utf-8"

Yes Patrick, To clarify I have used both the DXPatrol and FCDPro+ but in RX
duties only thus far. I am configuring a tracking panadapter on my RX side,
so I will look for degradation when TXing. My progress/experiments have been
delayed due to flu and weather.

I find the DXPatrol to be better performing than a generic RTL dongle, of
which I have several. Even the FCDPro+ suffers from front-end overload in my
location unless I use an FM BCB filter in front.

I also intend to use a duplexer unit in front of the SDR if 2M overload is
experienced.

I will keep posted if there is interest. 73 Brad WF7T


On Jan 10, 2018, 4:56 PM -0600, Patrick STODDARD (WD9EWK/VA7EWK)
<amsat-bb@xxxxxx.xxx>, wrote:
> Hi Brad!
>
> Have you used the DXPatrol receiver for working amateur
> satellites? I haven't worked anyone who has used it for the
> downlink side of their station, nor have I tried one, so
> I didn't list it in my earlier message. Besides the FUNcube
> Dongle Pro+ and various SDRplay receivers I mentioned in
> my earlier e-mail, I have also tried some of the RTL dongles
> in my satellite station. They were no good - no front-end
> filtering, and they stopped receiving whenever I transmitted
> with an HT or FT-817 on a different band than where I was
> receiving. That's why I first went with a FUNcube dongle,
> and later on the SDRplay units.
>
> I went to the DXPatrol web site and downloaded its PDF
> manual. It looks like an RTL dongle with an upconverter
> for its coverage below 25 MHz. Its price is a little less
> than the SDRplay RSP1A sold by HRO.
>
> 73!
>
>
>
>
> Patrick WD9EWK/VA7EWK
> http://www.wd9ewk.net/
> Twitter: @xxxxxx or http://twitter.com/WD9EWK
>
>
>
>
>
>
> > On Wed, Jan 10, 2018 at 10:27 PM, Brad Brooks <brad.wf7t@xxxxx.xxx> wrote:
> > > Also, the DXPatrol Mk4 is an option. It is designed by CT1FFU and
available in US from Vibroplex. 73 Brad WF7T
> > >
>


------------------------------

Message: 2
Date: Wed, 10 Jan 2018 23:18:06 +0000
From: Frank Woelfle <frank.woelfle@xxxxx.xxx>
To: John Geiger <af5cc2@xxxxx.xxx>
Cc: radiogear4sale@xxxxxxxxxxx.xxxxxxxxxxxxxxx@xxxxxxxxxxx.xxxx
<oktraders@xxxxxxxxxxx.xxx>,	AMSAT BB <amsat-bb@xxxxx.xxx>,
carolinahamswap@xxxxxxxxxxx.xxxxxxxxxxxx@xxxxxxx.xxx.xxxx
radiogear@xxxxxxxxxxx.xxxxxxxxxxxxx <ham4sale@xxxxxxxxxxx.xxx>,
forsale-swap@xxxxxxx.xxx.xxx
Subject: Re: [amsat-bb] [Kenwood] FS: Kenwood TS2000
HF/VHF/UHF/satellite	radio
Message-ID:
<CAD2sky13+GgRUSmpmroQOnBdZnsXnK8s57xbvfbLtSL-YGreDg@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"

Hey John, did you sell this radio?

On Thu, Jan 4, 2018 at 2:21 PM John Geiger <af5cc2@xxxxx.xxx> wrote:

> I have for sale a Kenwood TS2000 HF/VHF/UHF satellite transceiver.  Does
> 100 watts on HF, 6m  and 2m, and 50 watts on 70cm.  Has IF DSP for noise
> reduction and IF filtering, also has TCXO installed, and CW memory keyer.
> The internal TNC in this radio doesn't work so you cannot use it for remote
> control by Sky Command.
>
> Also, the radio took a little tumble a couple of months ago and one corner
> of the bezel got banged up a little, and a couple of the buttons got pushed
> in a little into the bezel but they still do operate.  The noise reduction
> button is pushed in the furthest and I programmed the PF key to control
> noise reduction.  I am including a hand mic with 4 programmable buttons on
> it so you can use it to control some of these other functions.
>
> The TS2000 has the DRU-3A voice recorder installed, which is a $119 value.
> It also comes with a power cord, original box, and manual.
>
> I am asking $550 for it plus any shipping that is needed.
>
> 73 John AF5CC
> ______________________________________________________________
> Kenwood mailing list
> Home: http://mailman.qth.net/mailman/listinfo/kenwood
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Kenwood@xxxxxxx.xxx.xxx
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to frank.woelfle@xxxxx.xxx
>


------------------------------

Message: 3
Date: Wed, 10 Jan 2018 18:53:17 -0500
From: David G0MRF <g0mrf@xxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: [amsat-bb] Fox Tlm with FC dongle
Message-ID: <160e27e0217-171e-511f@xxxxxxxxxxxxx.xxx.xxxxxxx.xxx>
Content-Type: text/plain; charset=utf-8

Hi all.

I've returned from a break over Christmas and noticed the signal level on my
fox-tlm screen has dropped.
I've also noticed that the various parameters for the dongle include   LNA
and Mixer gain along with IF bandwidth of 200kHz
However, there is also a box that says RF filter and that is set to 0-4MHz.

I can't see anyway to change the RF filter setting !   I assume this should
be 2m to select the internal SAW filter.
Any idea where I can start looking?

Many thanks

David  G0MRF


------------------------------

Message: 4
Date: Wed, 10 Jan 2018 18:59:10 -0500
From: Paul Stoetzer <n8hm@xxxxx.xxx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Fox-1D Launch Live Blog
Message-ID:
<CABzOSOoybwGPnN912-3pinnuknguRoO7wJukCLZsZZ+aBd4f6g@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"

The countdown to the launch of PSLV-C40 carrying AMSAT's Fox-1D
satellite is underway! The 28 hour countdown began at 23:59 UTC on
January 10, 2018. Fox-1D is scheduled for launch into a
sun-synchronous orbit at 03:59 UTC on January 12, 2018 (10:59pm EST on
Thursday, January 11th) from Satish Dhawan Space Centre in
Sriharikota, India. A live blog of events, links to live video when
available, and more can be found at
https://www.amsat.org/fox-1d-launch-live-blog/


73,

Paul Stoetzer, N8HM
Executive Vice President
Radio Amateur Satellite Corporation (AMSAT-NA)


------------------------------

Message: 5
Date: Wed, 10 Jan 2018 19:14:21 -0500
From: "Mark L. Hammond" <marklhammond@xxxxx.xxx>
To: Paul Stoetzer <n8hm@xxxxx.xxx>,AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] [Bod] Fox-1D Launch Live Blog
Message-ID: <woEM1w00G2NCbDF01oEMUH@xxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"

Paul, thanks for doing a great job pimping our goods!  :)

Mark

At 06:59 PM 1/10/2018 -0500, Paul Stoetzer wrote:
>The countdown to the launch of PSLV-C40 carrying AMSAT's Fox-1D
>satellite is underway! The 28 hour countdown began at 23:59 UTC on
>January 10, 2018. Fox-1D is scheduled for launch into a
>sun-synchronous orbit at 03:59 UTC on January 12, 2018 (10:59pm EST on
>Thursday, January 11th) from Satish Dhawan Space Centre in
>Sriharikota, India. A live blog of events, links to live video when
>available, and more can be found at
>https://www.amsat.org/fox-1d-launch-live-blog/
>
>
>73,
>
>Paul Stoetzer, N8HM
>Executive Vice President
>Radio Amateur Satellite Corporation (AMSAT-NA)
>_______________________________________________
>Via the BOD mailing list at AMSAT.ORG courtesy of AMSAT-NA
>http://www.amsat.org/mailman/listinfo/bod


------------------------------

Message: 6
Date: Thu, 11 Jan 2018 00:14:07 +0000 (UTC)
From: Scott Harvey <ka7fvv@xxxxx.xxx>
To: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: [amsat-bb] Fox Telemetry using Funcube Dongle Pro Plus
Message-ID: <1836069477.772774.1515629647394@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset=UTF-8

Has anyone successfully captured Fox Telemetry using the Funcube Dongle Pro
Plus?? I had a great signal but nothing decoded.? Any tips would be
appreciated.??
73, Scott, KA7FVV
 President - KBARA ?
www.kbara.org
 Co-Owner WA7DRE 443.525 System Fusion Repeater
http://www.ka7fvv.net

------------------------------

Message: 7
Date: Wed, 10 Jan 2018 19:37:13 -0500
From: Burns Fisher <burns@xxxxxx.xx>
To: Scott Harvey <ka7fvv@xxxxx.xxx>
Cc: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Fox Telemetry using Funcube Dongle Pro Plus
Message-ID:
<CABX7KxUoDuCDK-iEqsyXN4SmVxLb-JVe7RJSpSKgVGXNSqKmWA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"

Oh yes...the FCDPP is the "standard" SDR that FoxTelem folks use.  Tell us
more---you have a "strong signal".  Does that mean you have a nice "hump"
 on the FFT (bottom) line?  Are the "demodulation bars" surrounding it?  Do
you have an eye pattern in the right box?  Two thoughts:  1) It is not as
strong as you think and you need to check LNA or IF Amplification.  2)
Although you can see the signal with you own eyes, FoxTelem is not looking
at the right frequency.  Be sure that under "spacecraft" and either AO-85
or AO-91 the nominal, min, and max frequencies are ok.  Nominal should be
145980 for AO85, 145960 for AO-91.  Min and max should be 10Khz below and
above that.

Oh, and what version of FoxTelem do you have?  Older versions might not
recognize AO-91.

Good luck and 73,

Burns, WB1FJ


------------------------------

Message: 8
Date: Wed, 10 Jan 2018 19:39:43 -0600
From: "Mac A. Cody" <maccody@xxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Fox-1D Launch Live Blog
Message-ID: <edcd385b-a640-5841-5a40-44afecfd6bd4@xxx.xxx>
Content-Type: text/plain; charset=utf-8; format=flowed

Paul,

Beyond being placed into a sun-synchronous orbit, do you have any
notion as to what the time of ascending node will be?? Will it be
different than AO-91?

73,

Mac Cody / AE5PH

On 01/10/2018 05:59 PM, Paul Stoetzer wrote:
> The countdown to the launch of PSLV-C40 carrying AMSAT's Fox-1D
> satellite is underway! The 28 hour countdown began at 23:59 UTC on
> January 10, 2018. Fox-1D is scheduled for launch into a
> sun-synchronous orbit at 03:59 UTC on January 12, 2018 (10:59pm EST on
> Thursday, January 11th) from Satish Dhawan Space Centre in
> Sriharikota, India. A live blog of events, links to live video when
> available, and more can be found at
> https://www.amsat.org/fox-1d-launch-live-blog/
>
>
> 73,
>
> Paul Stoetzer, N8HM
> Executive Vice President
> Radio Amateur Satellite Corporation (AMSAT-NA)
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>



------------------------------

Message: 9
Date: Wed, 10 Jan 2018 20:43:26 -0500
From: Paul Stoetzer <n8hm@xxxx.xxx>
To: "Mac A. Cody" <maccody@xxx.xxx>
Cc: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] Fox-1D Launch Live Blog
Message-ID:
<CABzOSOrzL-KwNSE_Kh0FRsK7twcQKzE4iYkzet5Y=U4e5yySaA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"

9:30 is the local time of equatorial crossing of the descending node.
A good time for convenient morning and evening passes!

73,

Paul, N8HM

On Wed, Jan 10, 2018 at 8:39 PM, Mac A. Cody <maccody@xxx.xxx> wrote:
> Paul,
>
> Beyond being placed into a sun-synchronous orbit, do you have any
> notion as to what the time of ascending node will be?  Will it be
> different than AO-91?
>
> 73,
>
> Mac Cody / AE5PH
>
>
> On 01/10/2018 05:59 PM, Paul Stoetzer wrote:
>>
>> The countdown to the launch of PSLV-C40 carrying AMSAT's Fox-1D
>> satellite is underway! The 28 hour countdown began at 23:59 UTC on
>> January 10, 2018. Fox-1D is scheduled for launch into a
>> sun-synchronous orbit at 03:59 UTC on January 12, 2018 (10:59pm EST on
>> Thursday, January 11th) from Satish Dhawan Space Centre in
>> Sriharikota, India. A live blog of events, links to live video when
>> available, and more can be found at
>> https://www.amsat.org/fox-1d-launch-live-blog/
>>
>>
>> 73,
>>
>> Paul Stoetzer, N8HM
>> Executive Vice President
>> Radio Amateur Satellite Corporation (AMSAT-NA)
>> _______________________________________________
>> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
>> to all interested persons worldwide without requiring membership. Opinions
>> expressed
>> are solely those of the author, and do not reflect the official views of
>> AMSAT-NA.
>> Not an AMSAT-NA member? Join now to support the amateur satellite program!
>> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb
>>
>
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
> expressed
> are solely those of the author, and do not reflect the official views of
> AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb


------------------------------

Message: 10
Date: Thu, 11 Jan 2018 01:49:00 +0000
From: Richard Lawn <rjlawn@xxxxx.xxx>
To: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] SDR Radios
Message-ID:
<CADQmrTHPi+M2YuWqY=AZesmNt2_KFpVbG+CjUWYd1M78mYz-QQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"

There are a number of good inexpensive SDR receivers out there but I don?t
see anyone who is successfully controlling them with software such as
satpc32. I believe the FunCube Dongle can be controlled by satpc32.

73
Rick, W2JAZ
--
Sent from Gmail Mobile


------------------------------

Message: 11
Date: Wed, 10 Jan 2018 20:49:51 -0500
From: "Mark L. Hammond" <marklhammond@xxxxx.xxx>
To: David G0MRF <g0mrf@xxx.xxx>,amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] Fox Tlm with FC dongle
Message-ID: <wppr1w0042NCbDF01pprbj@xxxxx.xxx>
Content-Type: text/plain; charset="us-ascii"

Hello David!

 From time to time with the FCDPP I find this helpful to do if something is
going "wrong":

exit FoxTLM
unplug/plug in FCDPP
followed by launching FCHID2.002.exe then resetting to default values, then
setting the frequency to the "center" frequency I want to use with FoxTLM
followed by launching FoxTLM

That fixes about anything "weird" I've seen!  Give that a go.

Mark N8MH

At 06:53 PM 1/10/2018 -0500, David G0MRF via AMSAT-BB wrote:
>Hi all.
>
>I've returned from a break over Christmas and noticed the signal level on
my fox-tlm screen has dropped.
>I've also noticed that the various parameters for the dongle include   LNA
and Mixer gain along with IF bandwidth of 200kHz
>However, there is also a box that says RF filter and that is set to 0-4MHz.
>
>I can't see anyway to change the RF filter setting !   I assume this should
be 2m to select the internal SAW filter.
>Any idea where I can start looking?
>
>Many thanks
>
>David  G0MRF
>_______________________________________________
>Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
>to all interested persons worldwide without requiring membership. Opinions
expressed
>are solely those of the author, and do not reflect the official views of
AMSAT-NA.
>Not an AMSAT-NA member? Join now to support the amateur satellite program!
>Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb


------------------------------

Message: 12
Date: Wed, 10 Jan 2018 20:52:06 -0500
From: Paul Stoetzer <n8hm@xxxx.xxx>
To: Richard Lawn <rjlawn@xxxxx.xxx>
Cc: AMSAT BB <amsat-bb@xxxxx.xxx>
Subject: Re: [amsat-bb] SDR Radios
Message-ID:
<CABzOSOpodGdX21LKkB_t+RR0fGfvE8rb4p0dysJxPPyMJBXJHQ@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"

It's not about the receiver, it's about the software used with the
receiver. HDSDR and Gqrx can both be controlled by external programs.
I have made a couple of QSOs using computer control with Gqrx,
Gpredict, a FUNcube Dongle Pro+, and an FT-817. I know others have
used HDSDR with SatPC32 successfully.

73,

Paul, N8HM

On Wed, Jan 10, 2018 at 8:49 PM, Richard Lawn <rjlawn@xxxxx.xxx> wrote:
> There are a number of good inexpensive SDR receivers out there but I don?t
> see anyone who is successfully controlling them with software such as
> satpc32. I believe the FunCube Dongle can be controlled by satpc32.
>
> 73
> Rick, W2JAZ
> --
> Sent from Gmail Mobile
> _______________________________________________
> Sent via AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available
> to all interested persons worldwide without requiring membership. Opinions
expressed
> are solely those of the author, and do not reflect the official views of
AMSAT-NA.
> Not an AMSAT-NA member? Join now to support the amateur satellite program!
> Subscription settings: http://www.amsat.org/mailman/listinfo/amsat-bb


------------------------------

Message: 13
Date: Wed, 10 Jan 2018 20:58:08 -0500
From: "Mark L. Hammond" <marklhammond@xxxxx.xxx>
To: Richard Lawn <rjlawn@xxxxx.xxx>,amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] SDR Radios
Message-ID: <wpy81w00F2NCbDF01py860@xxxxx.xxx>
Content-Type: text/plain; charset="iso-8859-1"

Actually...if you use SDR#, there is a plugin that will use frequency data
out of SatPC32 (via DDE) that will change the frequency of a number of SDR
units...it will change the frequency, set the mode and filter width, etc. so
automated changing of satellites is very doable.

I've done this successfully with:
FCDP
FCDPP
Airspy
Airspy Mini
RTL based dongles

HDSDR is another good program that will let you do similarly.  Somehow I've
settled on SDR#...

If you become a telemetry nut, you'll also learn to appreciate what I call
"native support" of the FCDPP in programs like Funcube Dashboard and FoxTLM.
 They actually take control of the dongle and you don't need to use
something like SDR#/plugin.

There are lots of ways to skin that cat!

Mark N8MH


At 01:49 AM 1/11/2018 +0000, Richard Lawn wrote:
>There are a number of good inexpensive SDR receivers out there but I
don???t see anyone who is successfully controlling them with software such
as satpc32. I believe the FunCube Dongle can be controlled by satpc32. 73
Rick, W2JAZ -- Sent from Gmail Mobile
_______________________________________________ Sent via AMSAT-BB@xxxxx.xxx.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership. Opinions expressed are solely those of the
author, and do not reflect the official views of AMSAT-NA. Not an AMSAT-NA
member? Join now to support the amateur satellite program! Subscription
settings: http://www.amsat.org/mailman/listinfo/amsat-bb


------------------------------

Message: 14
Date: Thu, 11 Jan 2018 02:23:41 +0000
From: Richard Lawn <rjlawn@xxxxx.xxx>
To: "Mark L. Hammond" <marklhammond@xxxxx.xxx>
Cc: amsat-bb@xxxxx.xxx
Subject: Re: [amsat-bb] SDR Radios
Message-ID:
<CADQmrTGB+1jMu7vThn3qSDxP5mpbYE=ROWjUVZ2cjn_3dFuVDA@xxxx.xxxxx.xxx>
Content-Type: text/plain; charset="UTF-8"

Right. That?s what I meant to say as I Too have gotten satpc32 and HDSDR to
work nicely with FCDPP. I didn?t realize that DDE would work with the other
SDR RX. Good to know.
73
Rick, W2JAZ

On Wed, Jan 10, 2018 at 8:58 PM Mark L. Hammond <marklhammond@xxxxx.xxx>
wrote:

> Actually...if you use SDR#, there is a plugin that will use frequency data
> out of SatPC32 (via DDE) that will change the frequency of a number of SDR
> units...it will change the frequency, set the mode and filter width, etc.
> so automated changing of satellites is very doable.
>
> I've done this successfully with:
> FCDP
> FCDPP
> Airspy
> Airspy Mini
> RTL based dongles
>
> HDSDR is another good program that will let you do similarly.  Somehow
> I've settled on SDR#...
>
> If you become a telemetry nut, you'll also learn to appreciate what I call
> "native support" of the FCDPP in programs like Funcube Dashboard and
> FoxTLM.  They actually take control of the dongle and you don't need to use
> something like SDR#/plugin.
>
> There are lots of ways to skin that cat!
>
> Mark N8MH
>
>
> At 01:49 AM 1/11/2018 +0000, Richard Lawn wrote:
>
> There are a number of good inexpensive SDR receivers out there but I
> don???t see anyone who is successfully controlling them with software such
> as satpc32. I believe the FunCube Dongle can be controlled by satpc32. 73
> Rick, W2JAZ -- Sent from Gmail Mobile
> _______________________________________________ Sent via
> AMSAT-BB@xxxxx.xxx. AMSAT-NA makes this open forum available to all
> interested persons worldwide without requiring membership. Opinions
> expressed are solely those of the author, and do not reflect the official
> views of AMSAT-NA. Not an AMSAT-NA member? Join now to support the amateur
> satellite program! Subscription settings:
> http://www.amsat.org/mailman/listinfo/amsat-bb
>
> --
Sent from Gmail Mobile


------------------------------

Subject: Digest Footer

_______________________________________________
Sent via amsat-bb@xxxxx.xxx.
AMSAT-NA makes this open forum available to all interested persons worldwide
without requiring membership.  Opinions expressed
are solely those of the author, and do not reflect the official views of
AMSAT-NA.
Not an AMSAT member? Join now to support the amateur satellite program!
http://www.amsat.org/mailman/listinfo/amsat-bb

------------------------------

End of AMSAT-BB Digest, Vol 13, Issue 13
****************************************


Read previous mail | Read next mail